The VIP Lounge Roulette Forum

How to import and use Roulette Xtreme files.

It is very easy to do and it will take you longer to
read this than to actually do it.

First thing you should do is open your favorite text
editor.

Next, select the file from here by highlighting all the text using
your left mouse button. Once it is all highlighted, use
your pull-down menu and select "copy." A keyboard shortcut
to do the same thing is to use CTRL button and the "C" button

Now you have the files saved in your clipboard.

Activate your text editor and select "paste" from the pull-down
menu or use the keyboard shortcut of CTRL button and the "V"
button.

That was easy.

Now that you have it in your text editor you must save it properly.

To save it properly, highlight the actual name and copy it.
Then select "save as" from your pull-down menu and paste that
selection on the save as line using any method listed above.
Now to that we shall add a period (dot) and the letters "dgt" so
the file should look something like: Goodplay.dgt.

Using the upper portion of Notepad (or whichever editor ) where
it says "Save In" you will drill down to Roulette Xtreme 2.0/designer.
For most folks the path will be:
C:\Programfiles\Roulette Xtreme 2.0\designer.

Once it is saved in that location you then can open it via clicking
on "Designer" from the RX pull-down menu and then either "open system
file" or "system editor." In any case, you have to open the System
Editor and tic the box that says "Activate this System."

Now you are ready to rock and roll.